MB6800 Reset to Factory Default Procedure

The Reset to Factory Default procedure resets the MB6800 configuration settings, but
does not change the current firmware. The Forced Reload procedure will erase the
current firmware and configurations, please use it with caution when you need to
download new software.

Use this procedure to reset the network configuration values, including the MB6800 IP
Address, Subnet Mask, and so on. The current MB6800 Software will not be erased. This
procedure may be required if the password is forgotten or the configurations are forgotten.

When MB6800 is working in normal status, press and holds the RELOAD button for about
20 seconds, until all the indicator lights change to amber. Then release RELOAD button,
and press reset button to reboot MB6800, the factory default network values are restored.
Warning: If you press and hold the RELOAD button for more than 10 seconds
immediately after the MB6800 is power on or reset, the MB6800 will enter
Force Reload Procedure. The software in the MB6800 will be erased. You will
have to download software into MB6800 to make it work again.

Forced Reload Procedure:
Use this procedure to force the MB6800 back to default network configuration values and
download new MB6800 software. This procedure may be required when the current
MB6800 software is missing, corrupted or needs to be upgraded. If so, begin the Download procedure.
 

Download procedure:

1. Prepare you TFTP server. TFTP server is a computer with TFTP server software
   running. TFTP server can be freely downloaded from www.solarwinds.net. You
   can also search other TFTP servers from Internet if you like.
2. To download the MB6800 Software, you will need an Ethernet connected to the
   computer on which the TFTP server resides. This can be any computer on the
   LAN, or connected to the MB6800’s “LAN” port with a “crossover” Ethernet cable.
3. After force reload, MB6800's IP will be set to 172.16.0.1 by default, and MB6800
   will login the TFTP server with IP address “172.16.0.2” to download software
   named “firmware.bin” by default. So please change the IP address of TFTP
   server to 172.16.0.2, and change the MB6800 software name to firmware.bin,
   put it in the directory of TFTP server root.
4. After finishing this preparation, power on the MB6800.
5. Press the RESET button.
6. Press and hold the RELOAD button for about 10 seconds immediately after you
   press and release the RESET button until the POWER LED turns amber and the
   WWAN LED turns off. Result: The MB6800 deletes the current MB6800 software
   and Configuration files. Then MB6800 will download the software you have
   prepared in step 3. Observe what the TFTP displays and you should see
   downloading activity begins after a few seconds.
7. After finish this procedure, MB6800 will reboot automatically and you can see the
   POWER LED turns amber and blinks.
8.  MB6800 will be configured to the factory default value. Please refer Table 6-1 for
   the factory default value.
   Firmware Upgrade Procedure through Web
   Use this procedure to upgrade the newest version firmware for MB6800 through Web
   interface on user client. This procedure may be necessary when a new version of
   firmware is released.
    

1. MB6800's firmware is upgraded through Firmware tab.
2. Download the firmware from Top Global’s website at www.topglobalusa.com to your host PC.
3. Enter the location of the firmware file or click the Browse button to find the file.
4. Then, click the Upgrade Firmware button to upgrade the firmware.